Similar Items
Loading...
You May Like
Loading...
Product Description
Company Info
Product Description
1. LED panel tester
2. We can design the funcation as your needed
3. We can supply tester for different products
3. CE
1, the system function introduction
1.1 system using intelligent control software on each channel by cyclic test.
1.2 input module containing digital keys and function keys, the keys can input the actual circuit board test number.
1.3 display module: Including LED status display, and LED anomaly, when testing a channel circuit board when there is an abnormality, then the corresponding LED
Light, while LED shows the circuit board test abnormal state.
1.4 steps:
Switch 1 is used to select a 12 channel in a channel electricity, electricity if the circuit board has a short circuit phenomenon, it returns the corresponding means
For control system
The control system, such as normal, then tested no-load voltage, returned to the corresponding command to the control system, such as normal and then test negative
Load current, and return
The corresponding instruction.
When in test short step exception, control system to switch off the current channel 1, transferred to the next channel test.
When the test voltage is abnormal, the control system to switch off the current channel 2, transferred to the next channel test.
When the test load current abnormal, control system to switch off the current channel 3, transferred to the next channel test.
1.5 when the needs of one channel to be tested, only need to input corresponding to the number, then press # key, then the beginning of the
The specified channel is single
Body test.
1.6 body part adopts split design, according to the different product sizes only needs to replace the corresponding to the test fixture can enter
Line of production testing, machine
Frame, control circuit, strong universality, reducing the purchase cycle and cost.
1.8 adopted active measures of safety protection, put an end to the operations staff were shocked and other dangerous situations.
2, parameter index
2.1 power: 220VAC 1A / 50Hz
2.2 ambient temperature: -10° C~40° C
2.3 relative humidity: < 90%RH
2.5 test capacity: > 1900PCS/h (16CH Max
2.6 machine size: Of about400× 450× 280mm
3, the block diagram of the system.
The system adopts the switch array to switch between circuit boards to be tested, fully independent, test results are not affected by adjacent circuit board test node
Because of the influence of.
2. We can design the funcation as your needed
3. We can supply tester for different products
3. CE
1, the system function introduction
1.1 system using intelligent control software on each channel by cyclic test.
1.2 input module containing digital keys and function keys, the keys can input the actual circuit board test number.
1.3 display module: Including LED status display, and LED anomaly, when testing a channel circuit board when there is an abnormality, then the corresponding LED
Light, while LED shows the circuit board test abnormal state.
1.4 steps:
Switch 1 is used to select a 12 channel in a channel electricity, electricity if the circuit board has a short circuit phenomenon, it returns the corresponding means
For control system
The control system, such as normal, then tested no-load voltage, returned to the corresponding command to the control system, such as normal and then test negative
Load current, and return
The corresponding instruction.
When in test short step exception, control system to switch off the current channel 1, transferred to the next channel test.
When the test voltage is abnormal, the control system to switch off the current channel 2, transferred to the next channel test.
When the test load current abnormal, control system to switch off the current channel 3, transferred to the next channel test.
1.5 when the needs of one channel to be tested, only need to input corresponding to the number, then press # key, then the beginning of the
The specified channel is single
Body test.
1.6 body part adopts split design, according to the different product sizes only needs to replace the corresponding to the test fixture can enter
Line of production testing, machine
Frame, control circuit, strong universality, reducing the purchase cycle and cost.
1.8 adopted active measures of safety protection, put an end to the operations staff were shocked and other dangerous situations.
2, parameter index
2.1 power: 220VAC 1A / 50Hz
2.2 ambient temperature: -10° C~40° C
2.3 relative humidity: < 90%RH
2.5 test capacity: > 1900PCS/h (16CH Max
2.6 machine size: Of about400× 450× 280mm
3, the block diagram of the system.
The system adopts the switch array to switch between circuit boards to be tested, fully independent, test results are not affected by adjacent circuit board test node
Because of the influence of.
Address:
Yuan Shan Bei Li Building No. 6, 501 Huli District, Xiamen, Fujian, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Auto, Motorcycle Parts & Accessories, Construction & Decoration, Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Light Industry & Daily Use, Manufacturing & Processing Machinery, Security & Protection, Tools & Hardware
Company Introduction:
Founded in 2008, our company is specialized in designing, manufacturing and exporting all kinds of consumer electronics such as Car holders, GPS holders, tablet PC, MID& Mobile accessories, Bluetooth keyboards, holders, etc. We also own a store for the demonstration of IT products and mobile accessories and direct selling. Now our company is the leader in this field in China.
As one of the leading consumer electronics suppliers in China, we have been dedicated to this field ever since iPod was born. We have distributed our products to 30 countries and regions in Europe and 15 countries and regions in North and South America and Asia. A great majority of our products are compatible with RoHS and are approved by CE and FCC.
Supported by a strong R&D team, advanced manufacturing and testing equipment, optimized management and a strict QC/IQC system, we can provide you with ideal products. Our large-scale production ensures lower cost and competitive prices. Moreover, we provide technical and after-sales service for the purpose of helping users use our products correctly and meeting their requirements. We are keen on continuous development and modernization of our finished products. We ensure that what we produce will provide you with endless comfort.
We sincerely welcome both overseas and domestic customers to cooperate with us in the future. We also warmly welcome OEM and ODM orders. We are looking forward to offering the best service to you in the near future.
As one of the leading consumer electronics suppliers in China, we have been dedicated to this field ever since iPod was born. We have distributed our products to 30 countries and regions in Europe and 15 countries and regions in North and South America and Asia. A great majority of our products are compatible with RoHS and are approved by CE and FCC.
Supported by a strong R&D team, advanced manufacturing and testing equipment, optimized management and a strict QC/IQC system, we can provide you with ideal products. Our large-scale production ensures lower cost and competitive prices. Moreover, we provide technical and after-sales service for the purpose of helping users use our products correctly and meeting their requirements. We are keen on continuous development and modernization of our finished products. We ensure that what we produce will provide you with endless comfort.
We sincerely welcome both overseas and domestic customers to cooperate with us in the future. We also warmly welcome OEM and ODM orders. We are looking forward to offering the best service to you in the near future.
){kind=link}